Description of strip lath

Strip mesh lath is produced from thin galvanized steel, its LWD are lined regularly, and the mesh strand formed of diamond shape with special structure, holds the lath away from the surface to aid in the keying of stucco to the lath. A superior multi-purpose expanded steel base widely used for interior and exterior plaster and stucco reinforcement. The flat surface is easily cut and formed for use with flat or contoured surfaces. It is an excellent base for stone, spray on structural fireproofing, ornamental work, and under ceramic tile. The large number of openings provide for better stucco bonding in both pumped and troweled applications. This product is manufactured to specified weight with hot-dipped galvanized steel and can be used with complete confidence in all applications.

Specification

Reference	Weights (per sq. yd.)	Coil width(inch)	Pcs/Pallet	Length	Thickness
AB- BR4’’	0.55lbs/yd²	4’’	50	2-200m	0.2-0.6mm
AB-BR6’’	0.82lbs /yd²	6’’	50
AB-BR8’’	1.1lbs/yd²	8’’	50

Application

The brickwork lath coil is widely used in the construction, the hollow wall reinforcement, increases the elasticity, prevents the wall from cracking, is a good construction supplementary material. Brick work mesh coil lath is used for the foundation, wall and so on.it has higher request for strength and stability of place and local stress place, have a effect of reinforcement in the brick and block, used in the reinforced brick and block construction key points of the cement mortar in each, making bricks and cement mortar an integral structure of a whole, the maximum stress and vibration absorption, excellent shock and crack resistance, is a good building material.

Installation

The masonry joints are inserted at one-third of the normal thickness to form an integral structure to reinforce vibration, temperature changes and tensile stresses, especially on reclaimed foundations. Grids shall be tiled at brickwork joints.
The reinforcement must be completely embedded in the mortar.
To ensure its effectiveness, one is usually installed on every third of the brickwork joints.
Overlap must be at least 75mm(3 inches).